23rd International Dresden Lightweight Engineering Symposium
June 27-28, 2019
What our future will bring seems more uncertain today than it was 25 years ago. Euphoria, but also pessimism, have given way to a diffuse feeling of over-information and loss of orientation. In a world of highly dynamic, global and unfiltered communication, digital technology is turning into socio-economic dynamics that only visionaries could have predicted a quarter of a century ago and perhaps fantasists half a century ago.
Together with our partners, but also our competitors, we are in the midst of digital transformation. As lightweight engineers, we are called on to actively contribute to digital progresses in the field of Lightweight System Design in order to meet the upcoming economic, ecological and social challenges. We must recognize the potential of digitisation as early as possible and address the relevant challenges for our innovation processes and our products with purposeful dedication. Modern Function-Integrative Lightweight Engineering in Multi-Material Design with the aim of achieving the highest resource efficiency in all stages of the product development and the product life cycle is important here as an interdisciplinary bridge not only between the engineering sciences, but also to mathematics and the natural sciences as well as computer science. Digital methods, which are based on physical and chemical models as well as on expert knowledge and which also exploit the potential of artificial intelligence, are indispensable tools for quickly deciphering the complex interrelationships between material and process parameters and the resulting component and system properties. Smart extensions allow components and processes to be networked and, to the benefit of all of us, accompanied by digital twins across the entire life cycle.
The aim of this International Dresden Lightweight Engineering Symposium is both to briefly review what has been achieved on the occasion of the 25th anniversary of the Institute of Lightweight Engineering and Polymer Technology and to highlight the ongoing digital change from a historical perspective. Digitalisation brings people closer together through technology. But how can we bring our technology closer to people? That’s what we would like to discuss with you. Join us on a journey to new digital horizons!
Programme
Programme for Thursday, June 27th 2019
Venue: MESSE DRESDEN
Opening
9:00 am
Prof. Dr. Niels Modler
Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology, Chair of Function-Integrative Lightweight Engineering, Member of Board
Opening
Welcoming Greetings
9:10 am
Dr. Eva-Maria Stange
Saxon State Minister for Higher Education, Research and the Arts
Greetings
9:20 am
Prof. Dr. Gerhard Rödel
Vice-Rector for Research of Technische Universität Dresden
Greetings
9:30 am
Dr. Winfried Horstmann
German Ministry for Economic Affairs and Energy (BMWi), Director General, Industrial Policy
Digitisation and Lightweight Design as Location Factors
9: 55 am
Alastair McIntosh
Rolls-Royce Deutschland Ltd. & Co. KG, Engineering Director RRD and Chief Engineer, Business Aviation
Rolls-Royce “IntelligentEngine”
10:20 am
Prof. Dr. Maik Gude
Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology , Chair of Lightweight Design and Structural Assessment, Member of Board
Moving towards the Fourth Era of Lightweight Design
10:45 am
Coffee Break
Digital Product Development and Optimization
11:15 am
Dr. André Berger*, Prof. Dr. Thomas Pyttel**
*ESI Engineering System International GmbH, Technical Director , ** Technische Hochschule Mittelhessen
Customer-Specific Software Solutions within the Scope of Digital Product Development
11:40 am
Dr. Jens W. Meschke
Volkswagen AG, Lightweight Design & Structural Optimization Automotive Technology
Lightweight Design and Structural Optimisation by Using Graph- and Heuristics-based Topology Optimization within the Digital Development Process
12:05 am
Uwe Wawers*, Sebastian Stein
Dr. Ing. h.c. F. Porsche AG, *Manager Body Engineering Structure - 911
Lightweight engineering and digitalisation in the development and production process of Porsche 911
12:30 am
Lunch break
Production in the Digital Era
1:30 pm
Frik-Jan Kruger
Rolls-Royce Deutschland Ltd. & Co. KG, Head of System Design & Integration und Chief of Product Design Management
Electrification in Civil Aerospace
1:55 pm
Sebastian Rothenbert*, Dr. Thomas Sommer-Dittrich*
Daimler AG, *Future Technologies, **Manager Agile Cooperation/Future Technologies
Hardware and Digital Technologies for Future Mobility
2:20 pm
Prof. Dr. Axel Herrmann*, Sascha Backhaus**
* Faserinstitut Bremen e.V. (FIBRE), Head of Institute and Chairman of the Board ; ** CTC GmbH, Composites Technology Center Stade
Digital Transformation in Composite Manufacturing
2:45 pm
Coffee Break
Digital Products
3:15 pm
Markus Jetter*, Dr. Thomas Kuczera**
thyssenkrupp Elevator AG, *Head of Research & Innovation Center Rottweil, **Head of Mechanical Development MULTI®
MULTI® – World‘s First Ropeless Elevator System with Linear Drive and the Transformation of the Building Industry
3:40 pm
Hans Schlingmann
Weidmüller Monitoring Systems GmbH, Technical Managing Director
BLADEcontrol® as a Remote System for Damage Detection at Rotor Blades of Wind Turbine Generators
4:05 pm
Prof. Dr. Frank H.P. Fitzek*, Prof. Dr. Thorsten Strufe**
Technische Universität Dresden, *Institute of Communication Technology, Deutsche Telekom Chair of Communication Networks, **Institute for Systems Architecture, Chair of Privacy and Security
Tactile Internet with Human-Machine-Interaction
4:30 pm
Coffee Break
New Digital Horizonts
5:00 pm
Prof. Dr. Christoph Meinel
Hasso Plattner Institute for Digital Engineering gGmbH, Institute and Managing Director
Potentials of Digitisation – Shaping challenges
5:25 pm
Prof. Dr. Matthias Putz*, Prof. Dr. Steffen Ihlenfeldt**
Fraunhofer Institute for Machine Tools and Forming Technology (IWU) , *Director, Scientific Field Machine Tools, Production Systems and Machining, **Head of Cyber Physical Production Systems (CPPS) Department
Smart Production – agile, networked, human
25 Years ILK – Anniversary Ceremony, June 27th 2019, 7 pm
Venue: Messe Dresden
Programme for Friday, June 28th 2019
Venue: Institute of Lightweight Engineering and Polymer Technology
Dresden Lightweight Alumni – Trend-Setting Across All Industries
9:00 pm
Dr. Martin Dannemann
Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology, ILK Alumnireferent
Welcome
Digital Product Development and Optimization
9:10 am
Prof. Dr. Olaf Helms
University of Applied Science Emden/Leer
Approaches for the Modularisation of Electric Vehicles According to Circulation Requirements
9:35 am
Alexander Pabst*, Heiko Witte**
Rolls-Royce Deutschland GmbH & Co KG, *Product Maturity Lead, **Head of Engineering Improvement & Quality
Advanced Digital Technologies for the Design of Innovative Aero Engines
10:00 am
Maria Lißner, Prof. Dr. Nik Petrinic*
University of Oxford Department of Engineering Science Impact Laboratory, *Professor of Engineering Science
Combined Experimental and Numerical Methods to Evaluate Rate-Dependent Behaviour of Adhesive Joints
10:25 am
Dr. Jens Wiegand*, Dr. Giuseppe Zumpano**
*Compact Composite Impact Engineering Ltd, Director, **Impact Specialist, Rolls-Royce plc
The Long and Stony Way from a Physically Based Material Model to a Validated Digital Design Tool
10:50 am
Coffee Break
Production in the Digital Era
11:20 am
Dr. Jens Werner
thyssenkrupp Carbon Components GmbH, Chief Executive Officer
Digitised Production of CFRP High-Performance Components at thyssenkrupp
11:45 am
Dr. Manuela Andrich
Elbe Flugzeugwerke GmbH, Composite Structures & Interiors, Program Manager Technology
Digitisation in Aviation Technology at EFW
12:10 am
Alexander Schult
Rolls-Royce Deutschland GmbH & Co KG – Chief of Materials - Capability Acquisition
Controlled Plasma Treatment of Surfaces for Adhesive Preparation
12:35 am
Mirko Filler*, Dr. Andreas Freund
* Black East GmbH, Chief Executive Officer, ** Realize Engineering Dresden GmbH, Chief Executive Officer
Off the Beaten Track – How the Development of Cycling Parts Begins on the Desk and Does not End at the Dispatch Area
1:00 pm
Lunch Break
Digital Products
2:00 pm
Phillip Scheffel*, Johannes Garbino-Anton**
*APUS – Aeronautical Engineering GmbH, Chief Executive Officer; **Innovation Alliance for the Development of Low-Emission Aircraft Engines (IBEFA) Project Coordinator IBEFA
New Concepts for Low-Emission Aircraft Engines
2:25 pm
Benjamin Zenker
HOMMBRU GmbH, Research and Development
Music of the Future – Acoustics and Design in the Smart Home
2:50 pm
Yves Mattern, Philipp Strobel
Lignoa Leichtbau GmbH, Chief Executive Officer
Innovative Lightweight Design Meets Wood
Towards New Horizons
3:15 pm
Prof. Dr. Andreas Ulbricht
CG Rail, Managing Director
Digital Process Chains for the Development of Innovative Rail Vehicles
5:40 pm
Outlook, Closing and Coffee
DFG-SPP 1712 Colloquium: Intrinsic Hybrid Composites for Lightweight Load-Carrying Structures
9:00 am
Prof. Dr. Maik Gude
Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology, Chair of Lightweight Design and Structural Assessment
Welcome
9:10 am
Prof. Dr. Jürgen Fleischer
Karlsruhe Institut of Technology, wbk Institute of Production Science, Director
Intrinsic Hybrid Composites for Lightweight Structures – Fundamentals of Manufacturing, Characterization and Design – SPP1712
9:35 am
Zheng Wang, Prof. Dr. Tröster*
Paderborn University, Automotive Lightweight Design, *Chair holder
Intrinsic Fabrication of Metal-PMC Hybrid Structures Based on a Vacuum-Assisted Resin Transfer Moulding Process
10:00 am
Matthias Riemer, Prof. Dr. Welf-Guntram Drossel*
Fraunhofer Institute for Machine Tools and Forming Technology, *Executive Director, Scientific Field Mechatronics and Lightweight Structures
Crash-Loaded Structural Components: Efficient Lightweight Design through Intrinsic Hybridization
10:25 am
Fabian Günther, Prof. Dr. Markus Stommel*
Technische Universität Dortmund, Chair of Polymer Technology, *Chair holder
Challenges in the Development Process from Simple (2D) to Complex (3D) CFRP Hybrid Components with Thermoplastic-Injected Metal Inserts
10:50 am
Coffee Break
11:20 am
Markus Muth, PD Dr. Kay A. Weidemann*
Karlsruhe Institute of Technology, Institute for Applied Materials, *Head of Department Hybrid Materials and Lightweight Structures
Load-Carrying PMC-Metal Hybrid Structure for Automotive Crash Applications – Simulation, Production, Performance
11:45 am
Franz Hirsch*, Prof. Dr. Markus Kästner*, Prof. Dr. Maik Gude**, Veit Würfel**
Technische Universität Dresden, *Institute for Solid Mechanics, **Institute of Lightweight Engineering and Polymer Technology
Intrinsic Thermoplastic Composite Metal Hollow Structures with Multi-Scale Form Fitting
12:10 am
Jonas Nieschlag; Prof. Dr. Jürgen Fleischer*
Karlsruhe Institut of Technology, wbk Institute of Production Science, *Director
Fabrication and Dimensioning of Hybrid Hollow Structures in Centrifugal Process
12:35 am
Lukas Groß, Prof. Dr. Berend Denkena*
Leibniz Universität Hannover, Institute of Production Engineering and Machine Tools, *Director
Concepts for Load Introduction in Fibre Composite Structures for High-Performance Applications
1:00 pm
Lunch Break
Lightweight Region Saxony
2:00 pm
Prof. Dr. Ulrich Prahl
Technische Universität Bergakademie Freiberg, Chair for Forming Technology, Head of Institute
Significance and Development of the Key Technology of Lightweight Design in Saxony
2:25 pm
Prof. Dr. David Rafaja
Technische Universität Bergakademie Freiberg, Institute for Material Science, Head of Institute, Speaker of AMARETO
Boon and Bane of Big Data in Materials Science and Materials Design
2:50 pm
Dr. Daniel Weck
Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology
Smart Design – Interactive Product Design Processes
3:15 pm
PD Dr. Sandra Gelbrich*, Andreas Ehrlich
Technische Universität Chemnitz, Institute of Lightweight Structures, *Head of the research group Lightweight Constructions in Civil Engineering
Function-Integrative Lightweight Design in Civil Engineering – From Development to Practice
3:40 pm
Outlook, Closing and Coffee
9:00 am – 1:00 pm
CCeV Workshop: Using Data Properly to Develop and Automate Complex Manufacturing Processes
9:00 am - 1:00 pm
TransTech Workshop: Transport System-Overlapping, Synergetic Technologies for Regional Emission-Free Mobility
3:40 pm
Outlook, Closing and Coffee
–
East Saxon Competence Show on Lightweight Design
11:00 am - 6:00 pm
ILK Scientific Groups
- • Material Models
- • Lightweight Designs
- • Computational Methods and Simulation
- • Thermoplastic Processes
- • Thermoset Process and Preforming
- • Joining Techniques
- • Test Methods and Experiments
- • Functional Integration
- • Special Materials and Processes
Partnerships
- • AMARETO – Saxon Alliance for Material- and Resource-Efficient Technologies
- • ARBURG GmbH + Co KG
- • AUMO GmbH
- • Carbon Composites e.V.
- • FOREL – Forschungs- und Technologiezentrum für Ressourceneffiziente Leichtbaustrukturen der Elektromobilität
- • GK Concept GmbH
- • herone GmbH
- • IMA Materialforschung und Anwendungstechnik GmbH
- • Industrie- und Handelskammer Dresden
- • Korea Institute of Materials Science
- • Korea Institute of Science and Technology
- • Leichtbau-Allianz Sachsen e.V.
- • Leichtbau-Systemtechnologien KORROPOL GmbH
- • Leichtbau-Zentrum Sachsen GmbH
- • Mettler-Toledo GmbH
- • Polish-German Centre for Hybrid Lightweight Structures
- • Rolls-Royce University Technology Centre
- • SCABA GmbH
- • Symate GmbH
Venue
BÖRSE DRESDEN
Messering 6 | 01067 Dresden
Institute of Lightweight Engineering and Polymer Technology
| 01307 Dresden
